Cisco CCNA 200-301 Practice Test

Cisco Practice Tests

Question 1 / 55 - Mode : Exam
Which of these are QoS requirements when designing a Cisco TelePresence video network? (Choose two) A. One-way delay < 200 ms B. Round-trip delay < 200 ms C. Loss < 5% D. Loss < 0.05% E. Jitter < 100 ms F. Jitter < 50 ms You can use output filters in combination with any show command. Which of the following displays the output lines from a specific point, starting with the line that matches the filtering expression? A. include B. exclude C. begin D. section https://www.learncisco.net/courses/icnd-1/lan-connections/starting-a-router.html Which three statements about RSTP are true? (Choose three) A. RSTP significantly reduces topology reconverging time after a link failure. B. RSTP expands the STP port roles by adding the alternate and backup roles. C. RSTP port states are blocking, discarding, learning, or forwarding. D. RSTP provides a faster transition to the forwarding state on point-to-point links than STP does. E. RSTP also uses the STP proposal-agreement sequence. F. RSTP uses the same timer-based process as STP on point-to-point links. https://www.learncisco.net/courses/icnd-2/vlans-and-spanning-tree/stp-protocol-types.html Which two of these statements are true of IPv6 address representation? (Choose two) A. There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast. B. A single interface may be assigned multiple IPv6 addresses of any type. C. Every IPv6 interface contains at least one loopback address. D. The first 64 bits represent the dynamically created interface ID. E. Leading zeros in an IPv6 16 bit hexadecimal field are mandatory. https://www.learncisco.net/courses/icnd-1/introducing-ipv6/ipv6-address-types.html What can you verify on a Cisco IOS ISR with the ”show ip interface” command? (Choose five) A. The number of packets input and output on the interface B. The IP address and subnet mask of the interface C. The name or number of an ACL that is applied to the interface D. Whether the router is a DHCP relay agent E. The MAC address of the interface F. The method used to assign the IP address to the interface G. The status and protocol status of the interface Which two link protocols are used to carry multiple VLANs over a single link? (Choose two) A. VTP B. 802.1q C. IGP D. ISL E. 802.3u https://www.learncisco.net/courses/icnd-1/medium-size-switched-network-construction/vlans-and-trunk.html Which of the following commands will display information about the specific port channel interface? A. show etherchannel summary B. show interface port-channel C. show etherchannel port-channel https://www.learncisco.net/courses/icnd-2/etherchannel-and-l3-redundancy/configuring-etherchannel.html What commands would you need to configure to enable DHCP Snooping so that PC4 couldn’t become a rogue DHCP server? A. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/12, ip dhcp snooping trust B. Configure the following on SW 1: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/24, ip dhcp snooping trust C. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/24, ip dhcp snooping trust D. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/24, ip dhcp snooping trust E. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/12, ip dhcp snooping trust F. Configure the following on SW 1: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/24, ip dhcp snooping trust What versions of Wi-Fi Protected Access (WPA) were defined after the IEEE ratified the IEEE 802.11i security standard? (Choose two) A. WPA B. WPA2 C. WPA3 D. WPA0 What will occur automatically on a Cisco IOS router when you configure the interface to obtain an IPv4 address via DHCP and the DHCP server hands out IP address, subnet mask, and default-gateway information? A. The router will become a DHCP server for other devices B. The router creates an ACL to filter all traffic inbound from the Internet C. A static default route with a next-hop IP of the ISP will be created in the routing table D. The router will become a DHCP relay-agent E. A static route to the next-hop IP of the ISP will be created in the routing table Where is the Cisco IOS stored on a Cisco IOS ISR Router? A. CPU B. Flash C. RAM D. NVRAM E. ROM Which of the following is describing the Nonegotiate mode of Dynamic Trunking Protocol? A. Creates a trunk with the neighboring switch based on the DTP request B. Enables trunking on the interface C. Trunking cannot take place on the port regardless of DTP requests D. Sends a DTP communication that it wants to create a trunk with the neighboring switch E. DTP frames are prevented from being generated from the port https://www.learncisco.net/courses/icnd-2/vlans-and-spanning-tree/dynamic-trunking-protocol.html Review the topology diagram. Network 10.123.0.0/24 is the backbone area. Network 10.12.0.0/24 is area 1, and network 10.34.0.0/29 is in area 2. Which of the following are true? (Choose three) A. R1 is a backbone router. B. R1 is an ABR. C. R1 is an internal router. D. R3 would see the OSPF network of 10.12.0.0/24 as an intra-area route. E. R1 and R3 would have the same LSA information about the backbone area. Which statements best describe physical and logical topologies? (Choose two) A. The physical topology requires that data takes the shortest path across the network towards its destination B. The physical topology is dependent on the type of cabling that is used C. The logical topology can allow data to take a longer path across the network towards its destination D. The primary categories of logical topologies are bus, star, and mesh https://www.learncisco.net/courses/icnd-1/building-a-network/the-functions-of-networking.html What is the calculator of the total cost of a particular path referred to? A. Checksum B. Metric C. Bandwidth D. Length Which of the following route types is used when the route is manually configured by a system administrator? A. Directly connected B. Default route C. Dynamic routing D. Static routing https://www.learncisco.net/courses/icnd-1/ip-routing-technologies/static-routing.html Which Cisco IOS command is used to advertise a default route into an OSPF domain regardless of whether a default static route is configured? A. default-information originate B. default-information originate always C. default-information originate permanent D. default-information originate no-check Which command stores passwords as an SHA-256 or MD5 hash? A. service password-encryption B. service password-encryption {sha256 \| md5} C. enable password {sha256 \| md5} D. enable hash-password E. None of the above. Of the figures shown, which depicts an accurate Clos Architecture? A. Topology A B. Topology B C. Topology C D. Topology D You need to apply an access-list to the vty lines on your router so that you can control which users can make telnet and ssh connections to the device. Which command in line vty configuration mode will apply the access-list to the vty lines? A. ip access-group access-list-number out B. access-class access-list-number out C. access-class access-list-number in D. ip access-group access-list-number in E. access-list access-list-number in F. ip access-list access-list-number in G. access-list access-list-number out Refer to the diagram. What is the name of the device referenced with the arrow, assuming the traffic coming from the wireless clients followed the dashed path? A. Autonomous AP B. Lightweight AP C. Wireless controller D. Wireless router Which of the following commands displays the enabled OSPFv3 interfaces, along with the adjacent OSPF neighbors connected to them? A. show ipv6 ospf neighbor B. show ipv6 ospf C. show ipv6 route ospf D. show ipv6 ospf interface https://www.learncisco.net/courses/icnd-2/implementing-a-multiarea-ospf-solution/ospfv3-configuration.html You need to configure an IP address on your serial interface. Which command should you use from privileged EXEC mode to access the appropriate configuration mode and set the IP address? A. ip default-gateway B. ip address ip-address subnet-mask C. interface type number D. configure terminal https://www.learncisco.net/courses/icnd-1/lan-connections/configuring-a-router.html From the following options, what are the required REST API attributes? (Choose two) A. JSON-formatted data B. Unlayered systems C. Layered systems D. Client-server architecture What is the function of PVST+? A. Multiple 802.1w per VLAN B. One 802.1D per VLAN C. One 802.1w per VLAN D. Multiple 802.1D per VLAN https://www.learncisco.net/courses/icnd-2/vlans-and-spanning-tree/pvst.html What is the purpose of the “service password-encryption“ command? A. It encrypts all passwords on your router. B. It encrypts the line console password only. C. It encrypts the vty password only. D. It is not a valid cisco command Which cloud service model provides access to an application that is built, monitored, and offered by the cloud provider? A. TaaS B. IaaS C. PaaS D. SaaS Which of the following describes the Rapid PVST+ protocol? A. Assumes one 802.1D spanning tree for the entire bridged network B. Provides a separate 802.1D spanning tree for each virtual LAN, or VLAN, configured C. Provides fast conversion with a single instance of STP D. Provides fast conversion with an instance of spanning tree per VLAN https://www.learncisco.net/courses/icnd-2/vlans-and-spanning-tree/stp-protocol-types.html Which QoS feature is typically used outbound to an ISP to reduce the amount of traffic that is dropped by exceeding the purchased rate? A. Traffic shaping B. Traffic policing C. Traffic limiting D. Traffic classification Which cloud service is specific to one company that owns both the tools/infrastructure that creates the cloud and the people that use the services? A. Hybrid cloud B. Public cloud C. Private cloud D. Internal cloud All of the switches in your VTP domain are operating as servers. Which command changes the operation mode of DSW2 to client? A. vlan client B. show vlan brief C. vtp password client D. vtp mode client Which of the following are available methods of classifying packets in DiffServ on Cisco routers? (Choose three) A. Matching the IP DSCP field B. Matching the 802.1p CoS field C. Matching fields with an extended IP ACL D. Matching the SNMP Location variable During a maintenance window, you make some changes to R2. You document these changes in your configuration management system. Later that night, you are called in to fix an issue that requires you to make additional changes to R2. The next morning your co-worker addresses another issue but this time on R1. All of these changes are documented properly but neither you or nor your coworker discuss the changes. These changes stay implemented for months. What is this best described as? A. Version control B. Centralized configuration C. Configuration drift D. Configuration monitoring Identify the steps used to configure a point-to-point Ethernet-emulated WAN link. (Choose two) A. Configure demand multicasting B. Configure a dynamic route C. Turn on the interfaces D. Define a description for the WAN link https://www.learncisco.net/courses/icnd-1/lan-connections/configuring-a-router.html Suppose you would like to select a method to protect the privacy and integrity of wireless data. Which one of the following methods should you avoid because it has been deprecated? A. TKIP B. CCMP C. GCMP D. EAP What are the benefits of using Cisco IOS NetFlow? (Choose two) A. It provides network planning information B. It provides usage-based network billing C. It provides connectivity negotiation D. It provides DHCP services https://www.learncisco.net/courses/icnd-2/network-management/netflow-overview-and-configuration.html Which command would you use to ensure that an ACL does not block web-based TCP traffic? A. permit any B. permit tcp any any eq 80 C. permit tcp any eq 80 D. permit any any eq tcp What command should you configure globally to enable a 15-minute recovery time for the port security errdisable state? A. errdisable recovery interval 15 B. errdisable recovery timer 15 C. errdisable recovery timer 900 D. errdisable recovery interval 900 An engineer connects to Router R1 and issues a show ip ospf neighbor command. The status of neighbor 2.2.2.2 lists FULL/BDR. What does the BDR mean? A. R1 is an Area Border Router. B. R1 is a backup designated router. C. Router 2.2.2.2 is an Area Border Router. D. Router 2.2.2.2 is a backup designated router. When comparing controller-based networks and traditional networks what are some perceived benefits from a controller-based perspective? (Choose two) A. New operational models that allow the entire network to be instantiated and not just a single device at a time B. The use of automation through APIs that enable data-driven models C. New operational models that allow for a single device to be instantiated with the entire network in mind D. The use of legacy approaches in the network to increase efficiency and productivity Host A and Host B sit in two different subnets. The path between the subnets of these two hosts runs through three different Layer 3 forwarding devices (routers and Layer 3 switches). A network engineer uses the APIC-EM Path Trace ACL Analysis tool to analyze the path used for Host A to send packets to Host B. Which part of the function is done specifically by the ACL Analysis or ACL Trace part of the tool? A. Discovery of the topology that exists between the two hosts B. Analysis of the Layer 3 forwarding decisions in the path from Host A to B C. Analysis of the Layer 2 forwarding decisions in the path from Host A to B D. Analysis of the impact of ACLs on the packets that would flow from Host A to B Per the command output, with how many routers is router R9 full adjacent over its Gi0/0 interface? A. 7 B. 10 C. 5 D. 2 What command is used to prevent an interface from forming neighbor adjacency? A. router ospf B. passive-interface C. ip ospf D. default-information originate https://www.learncisco.net/courses/icnd-1/ip-routing-technologies/single-area-ospf.html What statements reflect the types of routers in an OSPF area structure? (Choose two) A. An autonomous system boundary router, or ASBR, connects any OSPF area to a different routing administration B. Routers that make up Area 0 are known as backbone routers C. An internal router connects Area 0 to the non-backbone areas D. Routers that make up non-backbone areas, with all interfaces in one area only, are known as area border routers, or ABRs https://www.learncisco.net/courses/icnd-2/an-overview-of-ospf/ospf-data-overview.html Suppose two APs are located near each other. Which channel use strategy will result in nonoverlapping channels for Wi-Fi use? (Choose two) A. Use 2.4-GHz channel 1 on AP-A and channel 2 on AP-B. B. Use 2.4-GHz channel 1 on AP-A and 5-GHz channel 48 on AP-B. C. Use 5-GHz channel 36 on AP-A and channel 40 on AP-B. D. Use 5-GHz channel 36 on AP-A and channel 37 on AP-B. What is the first thing a Cisco router does as part of its initial startup? A. Finds and loads the configuration file B. Performs software initialization C. Runs the power-on self test, or POST, to test the hardware D. Finds and loads the Cisco Internetwork Operating System, or 10S, image https://www.learncisco.net/courses/icnd-1/lan-connections/starting-a-router.html Which of the following commands would you use to enable EIGRP only on those interfaces with an IP address from 10.1.1.0 through 10.1.1.63? A. network 10.1.1.0 0.0.0.63 B. network 10.1.1.0/63 C. router eigrp 10.1.1.0 0.0.0.63 D. network 10.0.0.0 0.0.0.255 The mechanical properties for Ethernet depend on the type of physical medium. What statements best describe the types of Ethernet LAN connection media? (Choose two) A. Fiber optic variants of Ethernet offer high performance, electrical isolation, and wide distance B. Copper Ethernet can deliver high performance over distances of tens of kilometers C. Ethernet can conform to already-installed, twisted pair telephone wiring D. Shared copper cable was the original concept of computers communicating over Ethernet https://www.learncisco.net/courses/icnd-1/building-a-network/connecting-to-a-lan.html Refer to the exhibit. Which switch provides the spanning-tree designated port role for the network segment that services the printers? A. Switch1 B. Switch2 C. Switch3 D. Switch4 You have a Class A network with a /27 subnet mask. How many hosts can be addressed in that network? A. 62 B. 6 C. 2 D. 30 E. 14 F. 126 A _________ is a virtual instance of a traditional networking device that a consumer can use in a cloud. A. virtual network function B. virtual network appliance C. network virtualized element D. network cloud device Which QoS feature is typically used inbound to a network to limit the amount of traffic that is allowed to flow in? A. Traffic classification B. Traffic shaping C. Traffic limiting D. Traffic policing Given an IP address 172.16.28.252 with a subnet mask of 255.255.240.0, what is the correct network address? A. 172.16.16.0 B. 172.16.0.0 C. 172.16.24.0 D. 172.16.28.0 https://www.learncisco.net/courses/icnd-1/lan-connections/network-addressing-scheme.html Which command could you enter to encrypt passwords? A. enable secret B. username {username} secret {password} C. service password-encryption D. All of the above E. None of the above A MAC address table can store a number of address entries. However, sometimes conditions can cause the MAC address table to be empty. Identify these conditions. (Choose three) A. The switch is unplugged B. The switch loses power C. The switch is rebooted D. The switch floods broadcast communication E. The switch receives an Address Resolution Protocol or ARP request https://www.learncisco.net/courses/icnd-1/ethernet-lans/developing-design-for-layer-2.html

Our Recommended Premium CCNA Training Resources

These are the best CCNA training resources online:

Click Here to get the Cisco CCNA Gold Bootcamp, the most comprehensive and highest rated CCNA course online with a 4.8 star rating from over 30,000 public reviews. I recommend this as your primary study source to learn all the topics on the exam.

Want to take your practice tests to the next level? AlphaPrep’s purpose-built Cisco test engine has the largest question bank, adaptive questions, and advanced reporting which tells you exactly when you’re ready to pass the real exam. Click here for your free trial.

The CCNA 200-301 is for the Cisco Certified Network Associate (CCNA) Implementing and Administering Cisco Solutions exam. You can use the practice test to check your knowledge and improve your understanding in preparation for the Cisco CCNA certification exam.

The Cisco CCNA 200-301 practice exam tests include questions to test your knowledge and skills related to Cisco networking fundamentals, which helps you pass the actual exam.

The Cisco CCNA exam objectives include Cisco network fundamentals on routers, switches, IP addresses, etc., network access, IP connectivity such as static and dynamic routing protocol, IP services, network security fundamentals, and automation and programmability.

Cisco CCNA 200-301 Practice Test

Complete this form to get your score report

Our Recommended Premium CCNA Training Resources